Crocodile Epoxy Plus (Set 2 kg)
Attribute:
SKU :
-กาวปูและยาแนวกระเบื้อง จระเข้ อีพ็อกซี่ พลัส ชุดละ 2 kg -สุดยอดกาวปู & ยาแนวกระเบื้อง ทนแรงกระแทก ทนแรงดันน้ำ -สำหรับร่องยาแนวขนาด 2-6 มม. (ผนัง) และขนาด 2-12 มม. (พื้น). นำหนัก 2.3 kg (update 23/08/2024)
Colors
Categories : crocodilecookware ,
Share
Crocodile Epoxy Plus
100% Solid Epoxy Tile Adhesive and Grout
For area where highly bond strenght and chemical resistance are concerned
• Excellent tile adhesive and grout, high bond strength and durability.
• Ultimate resistance to harsh chemical and acid. Excellent water resistance.
• Anti-black mold, algae and bacteria with Microban, good for health.
• Excellent water repellent and anti-dirt absorption.
• No pungent smell and Ultra Low VOCs
• Joint width 2-6 mm (Wall), 2-12 mm (Floor)
Crocodile Epoxy Plus : Excellent high bond strength tile adhesives and grouts. It is best for high cleanliness and durable areas such as glass mosaic, resin mosaic, green marbles, natural stones, moisture sensitive materials. This product can install on any surface is concrete, brick walls, old tiles, metal sheet, glass, fiber glass. It is good for areas cleaned by chemicals such as in hospitals, pantry, kitchen, exterior usage, factory, bathroom, swimming pool. Good for health.
Standard : ANSI A118.3
Colors : 14
Packing
Net weight : 2 kg / Set (Part A 1,600 g : Part B 400 g)
How to use
Crocodile Epoxy Plus : Excellent high bond strength tile adhesives and grouts. It is best for high cleanliness and durable areas such as glass mosaic, resin mosaic, green marbles, natural stones, moisture sensitive materials. This product can install on any surface is concrete, brick walls, old tiles, metal sheet, glass, fiber glass. It is good for areas cleaned by chemicals such as in hospitals, pantry, kitchen, exterior usage, factory, bathroom, swimming pool. Good for health.
Installation
Joint width should be between 2-6 mm (wall) 2-12 (floor)and depth should not be less than 2/3 of tile thickness. Recommend to apply tile grout 48 hours after tile installation.
Preparation
Clean and remove any dirt or contaminations remaining in the joints. Make sure the joints are clean and dry before grouting.
Mixing Ratio
Part A 1 Bag : Part B 1 Bag (Resin 4 : 1 Hardener by weight)
Mixing
• Mixture should be done within one use. Separate mixture is not advised, and the mixture should be used within 20-30 minutes (depending on temperature).
• Mix the 2 components together and mix well by hand or low speed drill (<150 rpm)for at least 1 minute by either squeezing out B until very little is left as much as possible.
• Leave the mixture for 5 minutes for chemical curing and stirred the mixture once again, before applying.
Application
Tiling
• Apply Epoxy Plus on the surface by using a flat side of a trowel. The thickness of Epoxy Plus is approximately 2-3 mm for mosaic tiles and 4-6 mm for ceramic tiles.
• Using an appropriate notched trowel (60° angel), comb Epoxy Plus uniformly in a ridged pattern.
• Lay tiles on Epoxy Plus and press firmly with rubber hammer.
•Keep a minimum of 3/4 of the joint depth available for grouting. Clean off any excess adhesive from surface, tile joint, and trowel within 20-30 minutes (depend on temperature).
• Wait for 48 hours before grouting.
Limitations
Tiling
• Do not tiling on rubber surface.
• For tiling light colored marble or stone, use white Epoxy Plus.
• Do not tiling in the areas subject to vibration such as heavy machine.
• Do not tiling in the area with temperature lower than 16°C and higher than 35°C
Grouting
• In case of grouting porous or rough-surface tile, test in an inconspicuous place first.
•Do not recommend grouting in the area with temperature lower than 16°C and higher than 35°C. Not appropriate for the area temperature exceeding 100°C
• Grouting only a small area (1 to 2 m2) at a time.
• While cleaning Epoxy Plus from the surface of the tile, change sponge frequency.
• Ready to fill water in the pool after applied 7 days.
Caution
• May be harmful to the eyes, skin, or lungs. Wear suitable protective clothing, gloves, and eye/face protection.
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• After contact with skin, wash immediately with water.
• Keep out of reach of children.
Storage
• It should be kept in a dry place and the temperature is not too high to avoid product’s degradation.
• Use within 1 year from the date of manufacturing.
Packing
Net weight : 2 kg / Set (Part A 1,600 g : Part B 400 g)
Coverage ratio per 1 kilogram
| Size of Tiles (in./cm) | Thickness (mm) | Joint width (mm) | Approximate area (sq.m) |
| 1"x1" / 2.5x2.5 | 4 | 3 | 0.9 |
| 2"x2" / 5x5 | 6 | 3 | 1.2 |
| 5 | 0.7 | ||
| 4"x4" / 10x10 (General tile) | 6 | 3 | 2.5 |
| 5 | 1.5 | ||
| 7 | 1.1 | ||
| 4"x4" / 10x10 (Cray tile) | 10 | 3 | 1.5 |
| 5 | 0.9 | ||
| 7 | 0.6 | ||
| 8"x8" / 20x20 | 6 | 3 | 5.1 |
| 5 | 3.1 | ||
| 7 | 2.2 | ||
| 8"x10" / 20x25 | 6 | 3 | 5.7 |
| 5 | 3.4 | ||
| 7 | 2.4 | ||
| 12"x12" / 30x30 | 6 | 3 | 7.7 |
| 5 | 4.6 | ||
| 7 | 3.3 | ||
| 16"x16" / 40x40 | 6 | 2 | 11.6 |
| 3 | 7.7 |
Consumption and size of trowel
| Size of trowel | Consumption |
| Size 3x3 mm | 2.67 kg/m2 |
| Size 6x6 mm | 4 kg/m2 |
Information
| Pot life at 23 ± 2 °C | 50 minutes |
| Waiting time before grouting, keep cement dry at least | 48 hours |
| Time before traffic | 24 hours |
| Joint width | 2-6 mm (Wall), 2-12 mm (Floor) |
| Temperature resistance (Fully cure 7 days) | < 100 °C |
| Sagging resistance in vertical at 20 minutes. | Joint width 6 m |
| VOCs Content (WELL and LEED v4, v4.1) | Pass |
| VOCs Emission (WELL and LEED v4, v4.1) | Pass |
