SKU :
Unithane W-4000 2 component system A,B swimming pool paint Part A,B volume: 3 liters **Use with W-M-22 thinner -Resistant to chemicals, chlorine, acid, alkali -Resistant to moisture -Resistant to UV rays -Resistant to scratches and impacts -The film can be wiped with a sponge -Glossy and durable -Available in a variety of colors (update 7/6/2024)
Option name 1
Categories : Color for swimingpool , 
Brand : winwinpool
Share
Swimming Pool Paint Unithane W-4000 2 components system A,B **Use with W-M-22 thinner
Part A,B volume: 3 liters
- Chemical resistant, chlorine resistant, acid and alkali resistant
- Moisture resistant
- UV resistant
- Scratch and impact resistant
- The film can be wiped with a sponge
- Shiny and durable
- Available in a variety of colors
Academic information
1.Product Features
Unithane W-4000 2-component polyurethane system: For general works, extra durable formula Unithane W-4000 is a high quality, extra durable, 2-component general purpose polyurethane paint. Can be used for both exterior and interior works. Free of mercury and lead.
**Use with W-M-22 thinner
2.Key Features
* High gloss and durability
* Resistant to scratches and impact. Resistant to UV light and chemicals. Good resistance to acids and bases. Resistant to mold and rust. Resistant to moisture and the climate well * Easy to clean
3. Usage features
Unitane No. W-4000 is suitable for coating all surfaces, including wood, steel, cement, concrete and all types of metal. Can be used both inside and outside.
4. Paint film thickness and coverage rate
* Dry paint film thickness (microns): not less than 100 and not more than 150
Area to be applied (according to theory) (square meters/kilogram): not less than 20 not more than 30
5. Physical properties
* Paint type : 2-component polyurethane system paint
* Film appearance : Glossy and matte
* Shades : Various according to the catalog
* Drying time (at 25 degrees Celsius)
- Dry to the touch :2-4 hrs
- Drying time before recoating :5-8 hrs
- Usable dry time :8-12 hrs
- Complete drying time :3-5 days
* Stability after mixing : 1 - 2 hours (time decreases with increasing temperature)
-Working time : 6 - 8 hours (time decreases with increasing temperature)
Flash point : More than 31 degrees Celsius
6. How to use
- Equipment : : Brush, roller or sprayer
- Mixing before use : : Thinner No. M-22 (only specific thinner should be used
Because other types of thinner may not be able to dissolve and form lumps)
- Environment during use:
: Concrete surface should not have humidity exceeding 14% by weight.
: New cement surface should be left to dry for at least 28 days before painting.
: Paint film should not come into contact with oil, chemicals or pressure until the paint is completely dry.
: Mix Part A and Part B in the correct ratio (4 : 1) until mixed uniformly. And should not be mixed in large quantities at a time, to the point where the work cannot be completed within the specified working time (Pot life)
: It may be necessary to adjust the viscosity of the paint by adding Thinner No. M-22 in the amount of 0 - 10% by volume, depending on working conditions, temperature, equipment used for painting, etc.
7. Amount of use: For swimming pool work, number of coats of paint, recommended to apply 2 coats.
***Note If the pool size is 3x4x1.3m = 30 square meters, you need to apply 2 coats.
We recommend the following:
- 1 set (3 liters) can apply 30-40 square meters (apply 1 coat)
-2 sets (6 liters) can apply 30-40 square meters (apply 2 coats)
***Note If the pool size is 4x8x1.5m = 68 square meters, you need to apply 2 coats. We recommend the following:
-4 sets (12 liters) can apply 60-80 square meters. (Can be reapplied 2 times)