Application Instruction

Substrate Preparation

Clean the substrate with water. Remove mold and algae with a plastic brush or high-pressure water jet. Finally clean all dirt with water. Leave it to dry before applying the products.

Application Method

Apply 1 coat by brush or roller onto substrate without dilute by thinner or any solvents. Leave it to dry for 3-4 hours before applying paint to the topcoat.

Estimated Coverage

35-40 sq.m/gallon/coat. It depends on the type and condition of the substrate. The exact consumption must be determined by means of a sampling of the work.

Tools

Apply by brush or roller.

Tool Cleaning

Clean tools after use with water

Suggestion

• The product is designed for vertical areas.
• In case apply on new cement substrate. It must be left to dry for at least 28 days.
• Do not apply on surfaces in constant contact with water or moisture.
• In case of rain, let the substrate dry before applying.

Caution

• Recommend using rubber gloves, dust masks, eyeglasses and personal safety equipment.
• Apply with good ventilation. Do not inhale product.
• In case of contact with eyes, rinse immediately with water and seek medical advice.
• Keep away from children.

Storage

The shelf life is approximately 1 year if stored off ground in original, sealed containers and keep away from direct sunlight.