Chlorine stabiliser 5 kg

DESCRIPTION:
This compound is used to prolong the effectiveness of chlorine in swimming pool water.

PROPERTIES:
Appearance................................................... powder
Colour............................................................ White
pH (0,2%) ...................................................... 4,5 – 5

CHARACTERISTICS:
Avoids the rapid destruction of chlorine, caused by the ultraviolet rays of the sun:
CI2 + 2H2O  2 HCI + O2
Example
A) If a swimming pool with the appropriate quantity of chlorine is exposed to strong sunlight without the
protection of CHLORINE STABILISER (0400), the water will lose 90 % of its available chlorine within
three hours.
B) If 4 kilos of CHLORINE STABILISER (0400) per 100 cubic metres is added, the same water will lose
only 30 % of its chlorine in three hours.

DOSAGE AND INSTRUCTIONS FOR USE:
At the beginning of the swimming season add 4 kilos of CHLORINE STABILISER (0400) per 100 cubic metres
of water (40 ppm of cyanuric acid).
While the filtration equipment is in operation, place the required dose of product inside the skimmers or in the
pump pre-filter.
Recommendations:
Keep a level of a between 30 and 60 ppm of product in the water.
The concentration of product should not be higher than 60 ppm. If the level is higher the swimming pool should
be drained of some of its water, and replaced with water does not contain product.